XMG PRO 15 Audio Guia Del Usuario Concisa página 27

To configure the displays using the Display control panel:
1. Attach your external
display(s) to the appro-
priate port, and turn
it(them) on.
2. Right-click the desktop
and select Display
settings from the
menu.
3. Click the Detect button.
4. The computer will then
detect any attached
displays.
5. You can configure up to
4 displays from the
Multiple displays menu.
To configure the displays using the Project menu:
1. Attach your external display(s) to the
appropriate port, and turn it(them) on.
2. Press the + P (or Fn + F7) key
combination.
3. Click on any one of the options from
the menu to select PC screen only,
Duplicate, Extend or Second
screen only.
4. You can also click Connect to a
wireless display at the bottom of the
Project screen and follow the steps to
connect to any wireless enabled
display.
Figure 16
Display (Multiple displays)
Figure 17
Project
G-SYNC
(Only supported by a G-SYNC capable display in Dy-
namic Display Switch Mode)
Click to put a check in the box to Enable G-SYNC (it is
enabled by default). G-SYNC is designed to provide a
smooth game play experience from your GeForce product
by synchronizing the monitor's refresh cycle to the GPU's
render rate, thus removing lag and stutter issues, in order
to have objects appear sharper and scenes display instant-
ly.
Setting up G-SYNC
In a multiple display configuration set the G-SYNC capa-
ble display as the Primary Display.
G-SYNC Support
G-SYNC is only supported if you have a G-SYNC capable
display (contact your distributor or supplier for details).
Figure 18
Set Up
G-SYNC

23