User Maintenance - BaByliss PRO FXSM1E Manual De Instrucciones

LOW speed or HIGH speed
depending on the client
sensitivity or desired massage
strength.
6. Use the precision of your palm
and finger tips to massage the
back, neck, or face of client. The
massaging pulses will transfer
from the massager unit through
your hand to the client.
7. Once massage is complete
turn the massager to the OFF
position and remove from hand.

USER MAINTENANCE

1. Your massager is designed
for professional use, and is
virtually maintenance free. No
lubrication is needed. To clean
the massager, use a damp cloth
with water only. Do not use any
strong chemical cleaners.
2. If the cord or massager is
damaged or does not operate
properly, return it to an
authorized service center. Any
required servicing should be
performed by an authorized
service center. This appliance
has no user serviceable parts.
3. Never allow the power supply
cord to be excessively pulled
or twisted. Inspect the cord
frequently for damage. Stop
use immediately if damage is
visible or unit stops or operates
intermittently. Never wrap the
cord around the appliance.
DISPOSAL OF LITHIUM ION
BATTERY
1. Disconnect the massager from
electrical outlet.
2. Discharge the battery
completely before beginning
disassembly of massager.
3. Remove massager pad by
loosening and removing 4
screws.
4. Remove back cover by
loosening and removing 4
screws.
5. Remove the 4 screws
underneath where the
massager cover was located.
This will separate the top cover
and bottom cover.
6. Locate and remove the 2 screws
in the bracket holding the
lithium battery.
7. Disconnect and remove the
lithium ion battery.
8. To protect the environment, do
not dispose of your battery with
your ordinary household waste.
For more details on recovery of
material and waste-treatment
facilities, please contact the
waste disposal services in your
region.
6