Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
This Pro Clear Ultima unit is supplied with two 45o universal hosetails for connecting the clarifier to your water supply,
two brackets for mounting the unit and electrical connections which are similar to those found in a domestic plug.
Installation is explained below, but please read the safety information first on the left page.
GREEN WATER
ENTERS UNIT
1
Pro Clear Ultima units are weatherproof but not waterproof. The unit can be positioned either on its base on a raised
surface, or attached horizontally to a vertical surface using the brackets provided. It must not be submerged in water
or placed in a position where water may collect around the unit.
If installing the unit prior to or without a filter, it is important that a pre-filter is used on the water pump to prevent
excess solids from being pumped into the unit. The unit may be connected to the water supply using one of the
options below (see also page 3-5):
INSTRUCTIONS FOR INSTALLATION AND USE
POSITIONING THE PRO CLEAR ULTIMA
8
TRANSPARENT END CAPS
MAKE IT EASY TO SEE IF THE
UV LAMP IS WORKING
2
3
TREATED WATER
RETURNS TO POND
1. Pump with strainer
2. Filter
3. Pump
4. Gravity feed
5. Pressurised filter

Publicidad

Tabla de contenido
loading

Productos relacionados para TMC Pro Clear Ultima UV30

Este manual también es adecuado para:

Pro clear ultima uv55

Tabla de contenido