Uline H-7821 Manual Del Usuario página 2

ASSEMBLY CONTINUED
2. Align back cushion with mounting holes. Use one
Figure 2
5/16 x 1" screw (5) in top hole and one 5/16 x 1¼"
screw (6) in bottom hole to loosely secure. Repeat
on opposite side. (See Figure 2)
NOTE: Use Allen wrench to tighten all screws.
5
3. Insert plastic caps (7) in holes on back cushion to
cover screws. (See Figure 2)
6
7
1-800-295-5510
uline.com
PAGE 2 OF 6 0721 IH-7821