DCOOK 7659003 Manual De Instrucciones página 31

Make sure the appliance is always unplugged before
emptying it. Consult the "Maintenance and cleaning"
section.
• When you clean the appliance, do not use metallic
scouring sponges to avoid any future risk of electric
short circuit.
• Make sure you unplug the appliance before cleaning
it.
• Never switch on the appliance with an external
timer or by means of any type of independent remote
system.
• Remember, if the
surface, you must take care when handling the
product. This symbol indicates: CAUTION, this surface
can get very hot during use.
• The symbol is always displayed on the surface
with the highest temperature. However, the other
metallic and non-metallic surfaces can also heat
up considerably during use and, as a result, you are
recommended to take care when handling them and,
if possible to use isothermal gloves or another type
of thermal protection. When in doubt as regards the
temperature of a given surface, it is always preferable
to protect yourself.
symbol is displayed on any
31