Rev-A-Shelf RUKD-932-1 Manual De Instrucciones

CHROME UNIVERSAL WASTE PULLOUT
TOOLS REQUIRED:
#2
#2
3
32
No.
1
2
3
ESTIMATED ASSEMBLY TIME: 4
15 MIN
5 #8-32 X 3/8" Flat Head Machine Screws
6 #8 X 3/4" Truss Head Deep Thread Screws
7
8 Waste Container (20 qt or 32 qt)
9
CARE AND MAINTENANCE:
* Dependent on unit purchased
Clean with a damp
1
cloth and wipe parts
dry.
5 6
INSTALLATION INSTRUCTIONS: CHROME UNIVERSAL WASTE PULLOUT
STEP 3
FIG. 3
Extend the slides to full
extension and use the (4) #8
washers and #8-32 X 3/8" flat
head machine screws to secure
the frame to the slides
(See Figure 3).
#2
STEP 4
Place frame in desired position
(determined in Step 1) inside
the cabinet. Mark and pre-drill
FIG. 4
screw locations using 3/32"
drill bit and #8 x 3/4" truss
head deep thread screws (See
Figure 4).
3
#2
32
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
Parts List
Description Qty
Frame
Slides
Uprights
Handle
#8 Washers
Wire Basket*
2 3
7 8 9
STEP 1
Determine the position you
would like to install your waste
container, ensuring cabinet
frame or hinges does not
interfere with the unit (See
Figure 1).
STEP 2
Match the frame hole locations
1
with slide hole locations and
2 snap the frame into the slides
(See Figure 2).
2
1
4
4
4
1
1
4
I-RUKD-0421
STEP 5
Attach the uprights to the
frame and place trash can in
the uprights (See Figure 5).
STEP 6
Snap the handle to the front
upright. (See Figure 6).
Note: Continue to Step 7 if
you have a unit that comes
with a rear basket.
STEP 7
Line up the basket to back
clips on the frame and snap
into place (See Figure 6).
Note: Not all units come with
a wire basket
FIG. 1
FIG. 2
FIG. 5
FIG. 6
FIG. 7
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126