Assembly Instructions; Zero The Scale; Clean The Scale - Weston 24-0302 Manual Del Usuario

All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS

Before using the Flat Top Scale for
Wing Nuts
6
the first time, attach the Platform
Stainless Steel
Platform
onto the top of the Scale.
1. Begin by removing the
cardboard support from the top of
the Scale.
Tare
2. Attach the Platform to the top of
Dial
the Scale with the included Wing
Nuts.
Pointer
Plastic
3. DO NOT over-tighten the Wing
Face Plate
Nuts to prevent damaging the
threads.
Dial

ZERO THE SCALE

44 lb. Model Shown
After attaching the Platform to the top of the Scale, the Pointer may not
indicate "0" weight. Set the Pointer to the "0" position for the Scale to
accurately indicate an object's weight.
To zero the Scale, rotate the Tare Dial either clockwise or counter-clockwise
(depending on the direction in which the Pointer is off) until the Pointer
indicates "0" weight.
The Platform is to be empty while zeroing the Scale.
To ensure accurate weight, make sure the Pointer is set to "0" before
weighing an object.
To weigh objects in a container, place an empty container on the Platform
then rotate the Tare Dial to zero the Scale. The Scale will now only indicate
the weight of objects added to the container.

CLEAN THE SCALE

Thoroughly wipe clean with a soft damp cloth and mild detergent. Wipe
with clear water and dry immediately. DO NOT IMMERSE THE SCALE IN
WATER OR LIQUIDS.
3