3. Taking still pictures
Follow the steps to snap stills. Also use the Focus switch to set the
focus and the Control buttons
you can get best result.
Snapshot
Set the Mode switch to
Press the Shutter button to take pictures.
While the LED indicator is flashing red, the image is being captured; while the LED
turns green, the picture processing is done. (For more information of the LED message,
please see the "LED indicator events" section on page 42.)
Focus
Adjust the focus
before taking the
still picture. Push
the Focus switch,
then select the
mode best for your picture. The
following table tells you which
focus mode you may choose
with the distance from the
object.
Macro
12"~24" (30cm~60cm)
Micro
24"~
All manuals and user guides at all-guides.com
to adjust zoom in or zoom out so that
.
USB
(60cm~
)
~ 9 ~
Zoom in/out
Press the Control button
zoom in or the Control button
to zoom out.
to