Attaching Handle - Uline H-3619 Manual De Usuario

ATTACHING HANDLE

1. Place the locking handle (12) on the right hand door
and fasten with two slotted bolts and lock washers.
(See Figure 9)
2. Turn the handle to the open position (parallel to the
ground) and hook the locking cam (13) over the
square shank of the door handle. The latch must be
facing downward as shown. (See Figure 10)
13
3. With the handle still in the open position, hook the
locking bar (14) to the locking cam (13). (See Figure 11)
14
13
PAGE 5 OF 15
ASSEMBLY CONTINUED
4. Hold the lock bars in position while sliding the lock bar
12
Figure 9
5. Place the cotter pin (16) through the hole in the shank
Figure 10
6. Place dummy handle (17) on left hand door and
Figure 11
1-800-295-5510
uline.com
guide (15) over the lock bar ends and through the door
slots. (See Figure 12)
of the door handle. (See Figure 13)
fasten with 2 bolts and lock washers.
15
Figure 12
16
Figure 13
0321 IH-3619