U-Tec Ultraloq U-Bolt WiFi Guía De Instalación Y Usuario página 16

4. Standalone Mode Programming Guide
It is recommended to use U-tec App to program your lock. If
you don't have a smartphone or don't want to use the App, you
can use the programming instructions below.
Warning
Standalone Mode is NOT available after the lock is registered
in App! Please reset the lock to Factory Default Mode rst to
program your lock in Standalone Mode.
4.1 Add Admin Code in Standalone Mode
Admin Code must be created rst prior to any other programming.
Only one Admin Code is available.
Operation
Hold
Enter 4-8 digit Admin Code
and press
Enter the Admin Code again
and press
Success
4.2 Add User Code in Standalone Mode
Operation
Hold
Enter 4-8 digit Admin Code
and press
for 3 sec
for 3 sec
- 15 -
Indicator
2 beeps with ashing
green light
1 beep with green light,
then ashing green light
2 beeps with green light
All lights o
Indicator
2 beeps with ashing
blue light
2 beeps with green light,
then steady blue light