The Device Is Displayed In Device Manager With A "?" Mark; Cannot Connect A Usb Device - Buffalo IFC-PCIE2U3S2 Manual Del Usuario

The device is displayed in Device Manager with a "?" mark

The drivers are not installed properly. Refer to the "Quick Setup Guide".

Cannot connect a USB device

No empty USB port available
Notes:
• Only USB 3.0 hubs are recommended for use with the IFC-PCIE2U3S2. Hubs must support USB 3.0 to
perform at 5 GBps speeds. Non-compliant hubs will throttle all USB traffic to USB 2.0 or 1.1 speeds.
• For best results, USB hubs should be self-powered, or all USB devices connected to them must include
their own power supplies.
• Some USB devices do not support USB hubs. These devices will have to be plugged directly to a USB
port on the computer to function.
4
Remove a USB device, or connect a USB hub to use more
USB devices.