Preliminary Instructions - Carrier 40VCIR7FQEE Manual De Instrucciones

INFRARED RECEIVER

1. Preliminary instructions

This instruction booklet is an integral part of the manual of the device on which the kit is installed. In the
given manual, please refer to the sections WARNINGS and the BASIC SAFETY RULES.
The following symbols used in this publication indicate:
WARNING = actions requiring special care and appropriate training.
DO NOT = actions that MUST ON NO ACCOUNT be carried out.
2. Version
20064592
3. Kit Contents
1 Infrared receiver
2 Belt
3 Screw
4. Preliminary instructions
For correct installation, remember that the panel:
o Must be installed on a wall, preferably not on the perimeter wall and the one without any hot or cold pipes
inside it.
o In the case of wall installation, the device must be mounted 1.5 m above the floor.
o It must not be placed next to doors, windows, cooking devices, radiators and fan coils.
o Generally, it must not be placed in conditions that might alter the measured temperature.
o The maximum length of the connecting cable must be taken into account.
o Use a shielded cable for the connection.
o The connection cable must not be spliced; if splicing is necessary, it shall be tinned and adequately protected.
o Any trenching of the connection cable must be separated from the live wires.
Codes
Infrared Receiver
COMP TIMER OPER
1
1
2
3
1
1
2