English - Corsair iCUE SP RGB PRO Guia De Inicio Rapido

ENGLISH

INSTALLATION
> Connection notes
• Connect the fans into the Lighting Node CORE in sequential order from
1 > 2 > 3 > 4 > 5 > 6.
• Animations begin with fan 1 and proceed through fan 6.
• WARNING: Any fan not connected in series will break communication and
the RGB LED lighting function will not work.
> Turn your system off prior to installing your SP RGB PRO fans and the Lighting Node CORE.
> Mount the fans in sequential order with the mounting screws.
6
5 4
3
2
1
1
> Find a location for the CORE that allows connection for all the fans' RGB LED cables installed in your system to reach
the CORE then mount it with the provided mounting strips.
> Plug the 9-pin USB cable from the CORE into an available internal USB 2.0 header in your system.
• Refer to your motherboard manual for the location of the USB 2.0 header.
> Connect the SATA power connector to any available SATA connector from your system power supply.
DOWNLOAD CORSAIR iCUE
> For the full CORSAIR iCUE experience, please download our latest CORSAIR iCUE software at www.corsair.com/downloads.
An internet connection is required for software download. CORSAIR iCUE is required for lighting control.
R-R-CSI-RWF0040
Product Name (제품명칭): Lighting Node CORE
Model No.(모델명): RWF0040
2
ENGLISH