* There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indica-
tions.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Off
Blinking
On
** To enable Multi-Streaming, you need to connect a front panel audio cable to the front panel audio
header. After restarting your computer, you will ind the "Mixer" tool on your system. Please select
"Mixer ToolBox"
"6CH", or "8CH" and then you are allowed to select "Realtek HDA Primary output" to use the Rear
Speaker, Central/Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use the
front panel audio.
14
Description
No Link
Data Activity
Link
, click "Enable playback multi-streaming", and click "ok". Choose "2CH", "4CH",
Speed LED
Status
Description
Off
10Mbps connection
Orange
100Mbps connection
Green
1Gbps connection