Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Battery storage and carrying caps are provided for use
whenever the battery is out of the tool or charger. Remove cap
before placing battery in charger or tool.
WARNING: Fire hazard. Do not store or carry battery so that
metal objects can contact exposed battery terminals. For example,
do not place battery in aprons, pockets, tool boxes, product kit boxes,
drawers, etc., with loose nails, screws, keys, etc. without battery cap.
Transporting batteries can possibly cause fires if the battery
terminals inadvertently come in contact with conductive materials
such as keys, coins, hand tools and the like. The US Department of
Transportation Hazardous Material Regulations (HMR) actually prohibit
transporting batteries in commerce or on airplanes (i.e., packed in
suitcases and carry-on luggage) UNLESS they are properly protected
from short circuits. So when transporting individual batteries, make
sure that the battery terminals are protected and well insulated from
materials that could contact them and cause a short circuit.
Charging Procedure
DANGER: Electrocution hazard. 120 volts present at charging
terminals. Do not probe with conductive objects. Danger of electric
shock or electrocution.
1. Plug the charger into an appropriate outlet before inserting battery
pack.
2. Insert the battery pack into the charger. The red (charging) light will
blink continuously indicating that the charging process has started.
3. The completion of charge will be indicated by the red light remaining
ON continuously. The pack is fully charged and may be used at this
time or left in the charger.
Installing and Removing the Battery Pack
To insert the power pack into your flexible floodlight, slide it into the end
of the light until it snaps into place. To remove the power pack, depress
the release buttons shown and withdraw the power pack.
Switch
To turn the light on, slide the switch forward. To turn it off, slide the
switch back.
Replacing the Light Bulb
Floodlight Cat. No
Replacement Bulb Cat. No.
DW913
DW917
DW918
DW919
To replace the light bulb, first unscrew the lens holder. Pull the bulb out
of the spring, and insert a new bulb. Reinstall lens holder.
NOTE: Do not look directly into the flexible floodlight beam.
Spare Bulb Storage (Fig. 2)
To store a bulb, unscrew the lens holder and remove it. Inside the body
of the flexible floodlight is the storage socket. To remove the bulb, pull it
up and out of the storage area.
NOTE: Removing a pack from the charger and immediately inserting it
into the flexible floodlight may weaken bulb life.
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct
sunlight and excess heat or cold.
2. Long storage will not harm the battery pack or charger. Under
proper conditions, they can be stored for 5 years or more.
The RBRC™ Seal
The
RBRC™
(Rechargeable
Corp oration) Seal on the nickel cadmium, nickel metal
hydride or lithium ion batteries (or battery packs) indicate
that the costs to recycle these batteries (or battery packs)
at the end of their useful life have already been paid by D
some areas, it is illegal to place spent nickel cadmium, nickel metal
hydride or lithium ion batteries in the trash or municipal solid waste
stream and the RBRC program provides an environmentally conscious
alternative.
RBRC™ in cooperation with D
established programs in the United States and Canada to facilitate the
collection of spent nickel cadmium, nickel metal hydride or lithium ion
batteries. Help protect our environment and conserve natural resources
by returning the spent nickel cadmium and nickel cadmium, nickel
metal hydride or lithium ion batteries to an authorized D
center or to your local retailer for recycling. You may also contact your
DW9023
DW9043
DW9063
DW9083
Battery
Recycling
E
WALT and other battery users, has
E
WALT service
E
FIG. 1
LENS HOLDER
PORTE-LENTILLE
SUJETADOR DE LA LENTE
BULB / AMPOULE / BOMBILLA
POWER PACK
(NOT INCLUDED)
ENSEMBLE DE PILES
(NON COMPRIS)
BATERIA (NO INCLUIDA)
FIG. 2
RANGEMENT DE L'AMPOULE
local recycling center for information on where to drop off the spent
battery.
RBRC™ is a registered trademark of the Rechargeable Battery Recycling
Corporation.
Repairs
The charger is not serviceable. There are no serviceable parts inside
the charger.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments (including brush inspection and replacement) should
be performed by a D
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Three Year Limited Warranty
D
WALT will repair, without charge, any defects due to faulty materials
E
or workmanship for three years from the date of purchase. This warranty
does not cover part failure due to normal wear or tool abuse. For further
detail of warranty coverage and warranty repair information, visit www.
dewalt.com or call 1-800-4-D
does not apply to accessories or damage caused where repairs have
been made or attempted by others. This warranty gives you specific
legal rights and you may have other rights which vary in certain states
or provinces.
In addition to the warranty, D
D
WALT will maintain the tool and replace worn parts caused by
E
normal use, for free, any time during the first year after purchase.
If you are not completely satisfied with the performance of your
D
WALT Power Tool, Laser, or Nailer for any reason, you can return it
E
within 90 days from the date of purchase with a receipt for a full refund
– no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, see country specific
warranty information contained either in the packaging, call the local
company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
replacement.
Projecteurs flexibles
WALT. In
Modèles DW913 (9,6 V), DW917 (12 V), DW918 (14,4 V)
et DW919 (18 V)
– Utiliser avec des ensembles de piles et des chargeurs D
(vendus séparément).
POUR TOUT RENSEIGNEMENT SUR L'OUTIL OU TOUT AUTRE OUTIL
1 800 4-D
NOTE : Le projecteur flexible, modèle DW913, s'alimente à l'aide d'un
ensemble de piles de 9,6 volts. Le projecteur flexible, modèle DW917,
SPARE BULB STORAGE
DE RECHANGE
COMPARTIMIENTO PARA
BOMBILLA DE REPUESTO
WALT factory service center, a D
E
WALT (1-800-433-9258). This warranty
E
WALT tools are covered by our:
E
1 YEAR FREE SERVICE
90 DAY MONEY BACK GUARANTEE
D
WALT, COMPOSER SANS FRAIS LE :
E
WALT (1 800 433-9258)
E
SWITCH
INTERRUPTEUR
INTERRUPTOR
BATTERY
RELEASE BUTTON
BOUTON DE
DÉGAGEMENT
DE LA PILE
BOTON DE
LIBERACION DE
LA BATERIA
WALT
E
WALT for a free
E
WALT
E
Publicidad
