No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended Faucet Area
42" (106.7 cm)
1-3/16" (3 cm)
Product Information
Applicable product:
Drop-in rim style with heater
Fixture*:
Bathing well:
Basin area, bottom
50" (127 cm) x 31" (78.7 cm)
Basin area, top
61" (154.9 cm) x 34" (86.4 cm)
Weight
117 lbs (53.1 kg)
To overflow:
Water depth
14-1/2" (36.8 cm)
Capacity
86 gal (325.5 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template
V
Pump: 1-speed
120
Heater: 1.5 kw
120
Minimum access panel
pump/control (required):
1014768-1-B
Pump/Control Access
Front Or End
20" (50.8 cm) W x
15" (38.1 cm) H
3-1/2" (8.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1248-H
113927-7
Hz
A
60
7.5
60
12.5
20" (50.8 cm) W x
15" (38.1 cm) H
36" (91.4 cm)
36-5/8" (93 cm)
72" (182.9 cm)
1-1/2" OD
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
41 lbs/square foot (200 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
11"
(27.9 cm)
4"
(10.2 cm)
21"
(53.3 cm)
19-1/2"
(49.5 cm)
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.