Battery Operation - Olympia NC 451 Manual De Instrucciones

Operation
Connecting the Bank Note Counter
If the bank note counter will not be used for a
longer period, disconnect it from the power out­
let.
NC 451
Æ Connect the power plug [6] to a properly installed
power socket.
NC 452
Æ Connect the external power adapter to the power
supply port [6] of the bank note counter.
Æ Connect the power plug to a properly installed
power socket.
Switching the Bank Note Counter On/Off
The bank note counter is switched on and off using a
switch [9] on the rear of the machine.
After switching the bank note counter on, it completes
a self-diagnosis. During the self-diagnosis,
888
appear in the displays [17, 18]. When the self-
diagnosis has finished without any errors,
in the displays [17, 18].
If an error is detected, it is indicated in the right-hand
display [18] (refer to Clearing Errors).
14

Battery Operation

NC 452
The bank note counter can be operated either using
the mains power or a rechargeable battery.
Before the device can be operated via the battery for
the first time, the battery must be fully charged.
Æ Connect the external power adapter to the power
supply port [6] of the bank note counter.
Æ Connect the power plug to a properly installed
power socket.
The charging time required is about 8 hours.
Æ When the charging process has finished, discon­
nect the power adapter from the power supply port [6]
of the bank note counter.
Æ Disconnect the power plug from the power socket.
ÊThe bank note counter can now be used as a por­
table device.
888
and
X 0
appears
Giu