Led Status Indicators - Aurora AS619MD Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION Continued :
Caution: Do not hold CD/DVD with finger through the
center ring while feeding into the shredder. Serious injury may occur.
Never shred a credit card or CD/DVD by feeding through the paper feed slot. Never feed more than one
credit card or CD/DVD at a time.
Features a CD/DVD destroyer (Figure 4):
1) Lift safety cover to expose the CD/DVD entry.
2) Hold the CD/DVD by the edge and feed one at a time, releasing when shredding begins.
3) Shredder will stop when the entire disc has been destroyed.
4) Close cover when done shredding media.

LED Status indicators:

Power On
WARNING :
Avoid touching the document
feed opening with hands.
Product is not intended for use by
children (product is not a toy).
Do not insert foreign objects into
the document feed opening.
- RISK OF FIRE. NEVER dispose of flammable chemicals or materials that have come into contact
with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket.
- Always turn the shredder off and unplug the power cord from the AC outlet before cleaning it,
moving it, or emptying the waste basket.
- Never place the shredder near water or any heat source.
- Keep wastebasket emptied so that the shredder output is not impeded.
- Never use any petroleum based or flammable oils or lubricants in or around the machine as some
oils can combust causing serious injury.
- Never shred envelopes, labels or anything with glue or any sticky substance as this will lead to
paper jams.
- Do not use the shredder if the power cord is damaged in any way.
- Do not attempt to service this product yourself as doing so may expose you to sharp cutting blades
and/or electricity and will void the manufacturers warranty.
- Never let the wastebasket become full. This will lead to shredded material being pulled back up into
the shredder and cause jams.
- Never try to clean/clear the shredder blade.
3
FIGURE 4
Paper Overload
Door Open
Shredder Overheat
Do not spray or keep any aerosol
products in or around shredder.
Avoid loose clothing or jewelry
touching the document feed opening.
Avoid getting hair near the
document feed opening.
TROUBLE SHOOTING FOR AURORA PAPER SHREDDERS :
The shredder does not work at all.
a) Make sure that the unit is plugged in and that the outlet it is plugged into is in good working order.
b) Shredders with pull-out wastebaskets features a safety power cut off upon bin removal. Make sure
the pull-out wastebasket is properly set back into place.
c) In the event that the shredder is run continuously for too long and the motor overheats, a thermal
overload switch will automatically shut the power off. If this happens, move the switch to the off
position for 20 minutes or more before continuing.
The shredder runs in "Rev" mode but not in "Auto" mode.
a) The shredder will not start running until paper, CD/DVD, or credit card is inserted into the appropriate
feed slot. It is normal for the motor to run for a moment after the shredder is powered on but it should
stop until paper is inserted. The trigger that activates the shredder is located directly in the center of
the feed slot. If the paper you are inserting is narrow, it may not be hitting the switch. It is possible
that the trigger, which activates the shredder, has become blocked with paper. Insert an index card,
directly in the center of the feed slot, and apply force. This will usually clear any paper blocking the
switch or force the switch closed.
LIMITED WARRANTY :
Aurora warrants the cutting cylinders of the machine against defects of workmanship and material
for a period of 5 years from the original purchase date to the original consumer. Aurora warrants
all other parts of the machine against defects of workmanship and material for a period of 1 year
from the original purchase date to the original consumer.
Should there be a defect or malfunction of this product, Aurora will replace the product free of charge.
Customer is responsible for all shipping charges to return the defective product to Aurora. A copy of the
proof of purchase showing original purchase date is required. This warranty is void if the product has
been subject to damage, unreasonable use, improper service, or other causes not arising from defects
in original material or workmanship. This warranty is void if factory seal is broken or removed from the
product. This warranty does not include adjustments, parts or repairs required by circumstances beyond
the control of Aurora.
There are no expressed warranties other than those stated herein.
Any expressed or implied warranties, including but not limited to merchantibility and fitness for a
particular purpose are limited to the above warranty period. Aurora shall not be liable for any
incidental or consequential cost, expenses or damages resulting from any failure defect or
malfunction of this product.
Some states do not allow the exclusion of limitations of implied warranties or consequintial damages,
therefore, the above limitations may not apply to you.
This warranty grants you specific legal rights, and you may also have other rights that vary from
state to state.
Please contact us with any questions.
Aurora Corp. of America
3500 Challenger Street, Torrance, CA 90503 USA
1 - 800 - 327 - 8508
310 - 793 - 5650
( U.S.A. ONLY )
( INTERNATIONAL )
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

30619

Tabla de contenido