fourstargroup 11226036B Instrucciones De Montaje

MODEL: 11226036B
A FRAME DESK
SCREWDRIVER HAMMER
STEP 1
INSTALL BRACKET (3) INTO PANELS (L) AS SHOWN.
L
STEP 6 STEP 7
ATTACH BOTTOM SIDE PANELS (H) & (I) TO ATTACH LEG SUPPORT PANELS (G) TO
ASSEMBLED UNIT ,USING SCREW (1) AND (2), BOTTOM SIDE SUPPORT PANEL(N) ,USING
AS SHOWN. SCREW (1) , AS SHOWN.
N
I
K
N
M
H
J
L
E
H
M
B
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS CAREFULLY. FOLLOW
THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS. CARE SHOULD BE TAKEN
IN THE UNPACKING AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
4. PLACE ENTERTAINMENT CENTER ON FLAT, LEVEL SURFACE. ENTERTAINMENT
CENTER WILL NOT BE STABLE ON HIGH PILE CARPETING OR OUT OF LEVEL
SURFACES. NOT FOR USE ON HIGH PILE CARPETING OR OTHER SIMILAR SURFACES.
5. SHOULD YOU HAVE REASON FOR CONCERN FOR STABILITY AND SECURITY, TIPPING
OR KNOCKING OF THE TELEVISION DUE TO, BUT NOT LIMITED TO, SMALL
CHILDREN, PETS OR LOCATION, PLEASE TETHER TELEVISION TO THE WALL TO
PREVENT IT FROM TIPPING. TETHER NOT INCLUDED, REFER TO TELEVISION USER'S
MANUAL OR AFTER MARKET ACCESSORY DEALERS.
6. NOT FOR USE WITH TUBE STYLE, CRT TELEVISIONS. WEIGHT LIMIT 135 LBS.
Do you have any questions? Missing small parts or hardware? If you need assistance with the assembly
of your A FRAME DESK please e-mail our Customer Service Department at:
support@fourstari.com or call us at (508) 473-7688, (800) 639-3803 or
visit www.fourstari.com
Please include the following information when contacting us:
• Where item was purchased
• Item, model, style or SKU number listed on instructions or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster.
STEP 2
- ATTACH ASSEMBLED UNIT TO TOP PANEL (B)
USING SCREW (4), AS SHOWN.
L
B
STEP 8
ATTACH UPPER SIDE PANELS (D) TO TOP
PANEL (B) USING SCREWS (1), AS SHOWN.
N
D
G
I
K
D
N
M
M
L
J
E
M
B
NO. PART LIST
A UPPER TOP PANEL
B TOP PANEL
C BOTTOM PANEL
UPPER SIDE PANEL
D
E BOTTOM BACK SUPPORT PANEL
UPPER BACK PANEL
F
G LEG SUPPORT PANEL
H BOTTOM LEFT SIDE PANEL
I BOTTOM RIGHT SIDE PANEL
J BOTTOM LEFT BACK PANEL
K BOTTOM RIGHT BACK PANEL
L BOTTOM FRONT SUPPORT PANEL
M CENTER SIDE SUPPORT PANEL
N BOTTOM SIDE SUPPORT PANEL
STEP 3
ATTACH BOTTOM BACK PANELS (J) & (K) TO
BOTTOM BACK SUPPORT PANEL (E) USING
SCREW (2), AS SHOWN.
J
E
K
STEP 9
ATTACH UPPER TOP PANEL (A) TO UPPER SIDE
PANELS (D) , ATTACH BOTTOM PANELS (C) TO
BOTTOM SIDE SUPPORT PANEL(N) USING
SCREWS (1), AS SHOWN.
D
B
I
L M
N
K
E
H
G
D
N
J
E
M
J
H
N
PARTS LIST AND HARDWARE
QTY NO. HARDWARE LIST
1PC
1
M4 x 38 mm C/B SCREW
1PC
3
2 #8 x PH TAPPING SCREW
4
1PC
3
45mm BRACKET
3PCS
4 M4 x 25mm C/B SCREW
1PC
1PC
5
POWER PIN
1PC
1PC
1PC
1PC
1PC
1PC
2PCS
2PCS
STEP 4 STEP 5
ATTACH ASSEMBLED UNIT TO TOP PANEL (B) ATTACH SIDE SUPPORT
USING SCREW (1), AS SHOWN. PANELS (M) & (N) TO BOTTOM
BACK PANELS (J) & (K) USING
SCREW (1), AS SHOWN.
J
B
K
E
STEP 10
- ATTACH UPPER BACK PANELS (F) TO
THE BACK POSITION OF ASSEMBLED
UNIT USING POWER PIN (5), AS SHOWN.
A
D
STEP 11
D
UPRIGHT THE UNIT
B
K
I
C
N
G
QTY
36PCS
12PCS
3PCS
6PCS
16PCS
N
K
N
M
L
J E
M
K
C N
I
E
J
F
N A
M
D
H
B