M-Audio M-TRACK PLUS Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Features
1.
USB Port: Use the included cable to connect the M-Track Plus to a computer. M-Track
Plus requires a USB 1.1 (or higher) connection.
2.
Main Out: Use standard 1/4" cables to connect this output to a pair of powered
speakers. The level of this output is controlled by the Main Level knob.
3.
Main Level: Adjusts the output volume of the Main Out so you can control the listening
level of your connected powered monitors.
4.
MIDI In: Use a standard five-pin MIDI cable to connect this input to the MIDI Out of an
external MIDI device.
5.
MIDI Out: Use a standard five-pin MIDI cable to connect this output to the MIDI In of an
external MIDI device.
6.
S/PDIF In: Connect the digital output of another device (e.g., a keyboard, digital cable
box, media streaming device, etc.) to this input using a 75 Ω coaxial (RCA) cable. Note
that the Gain knobs, Main Level knob, and Headphone Volume knob do not affect the
signal level; the signal will be sent straight to your DAW without any adjustments.
7.
S/PDIF Out: Connect the digital input of another device (e.g., a stereo system receiver,
solid-state flash recorder, etc.) to this output using a 75 Ω coaxial (RCA) cable. The signal
sent from this output is identical to that of the Main Out.
8.
Input Selector: Selects M-Track Plus's input source. For normal operation (using the Mic
Inputs and Guitar/Line Inputs), set this switch to Analog. When using the S/PDIF In, set
this switch to Digital; M-Track Plus will ignore the Guitar/Line Inputs and Inserts.
9.
Phantom Power LED: Lights up when phantom power is engaged.
10. MIDI Out LED: Flashes when MIDI data is sent from your software to M-Track Plus's
MIDI Out.
11. MIDI In LED: Flashes whenever MIDI data is received from an external MIDI controller.
12. USB LED: Illuminates when a valid USB connection has been established between your
computer and M-Track Plus. Use this light to verify that M-Track Plus is receiving power
and is ready to use.
13. LED Meters: Indicates the audio level of the Main Out.
1 6 7
13
11
9
2
4 5
5
12
8
10
3

Publicidad

Tabla de contenido
loading

Tabla de contenido