Thank you for purchasing this Texsport cabana. Please read and understand each step of the set-up instructions. We encourage you to set-up this
cabana at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your
new cabana and that it will give you many years of camping pleasure.
PARTS LIST:
A ........1 Cabana skin
B..........1 Long fiberglass pole
C..........2 Sets of short fiberglass
poles
D ........Stakes
NOTE:
Prepare your camp site by removing
all sharp stones, twigs, etc. The site
should be flat and have no depres-
sions that could collect rain water.
STEP 1 - Spread the cabana
skin.
STEP 4 - Insert the pin and
ring into the ferrule end of the
long side pole. Do this on both
ends.
SSEMBLY INSTRUCTIONS
o not apply excessive force to this product.
A
STEP 2 - Assemble 1 short pole
and push it through the roof
sleeve, ferrule side first.
Repeat this step for the
remaining short pole. DO NOT
insert the pin into the pole.
STEP 5 - Insert the pin and
ring into the ferrule of the rear
short poles.
01832 Caribé Cabana
C
D
STEP 3 - Assemble the long
pole and push it through the
sleeve on the side of the
cabana skin.
STEP 6 - Insert the pole pin
into the grommeted web strap
above the front opening of the
cabana.
B