Texsport 14261 Instrucciones De Montaje

Thank you for purchasing this Texsport hammock stand. Please read and understand each step of the set-up in-
structions. We hope you enjoy your new hammock stand and that it will give you many years of outdoor pleasure.
A
PARTS LIST:
A ....2 end straight poles
B .....2 angled poles
C .....2 center base poles (with 2 screws)
D ....1 inner support pole (silver)
E .....2 sets of hooks
Assembly of the stand is generally easier with two people or with something to lean the
stand against for temporary support.
Remove all parts from the shipping carton and examine carefully for any signs of damage
or missing parts. Read this instruction sheet in its entirety prior to assembly or use.
STEP 1 - Place the parts on the ground in the manner indicated in the PARTS LIST DIAGRAM.
STEP 2 - Make sure that Part (D) Inner support pole (silver) is inside each (C) center base
poles as shown in diagram above. Slide completely closed, line up holes and secure with
thumb screws. NOTE: First build hammock stand completely, then adjust the base poles to
your desired hammock length with help from a friend.
STEP 3 - Snap the pieces together. Be certain the stand is assembled and used on solid, level
ground.
MAKE CERTAIN THAT EACH CONNECTION IS SECURELY AND COMPLETELY INSERTED INTO
THE ADJOINING PART AFTER ASSEMBLY. INSPECT PRIOR TO EVERY USE OF YOUR HAMMOCK
STAND, ESPECIALLY AFTER REMOVING OR INSTALLING YOUR HAMMOCK.
Do not apply excessive force to this product.
B
C
C
ASSEMBLY INSTRUCTIONS
#14261 • Deluxe Adjustable
Hammock Stand
C
D
A
B
C
E