Using For The First Time; Before First Time Use; Operating Instructions; Care And Cleaning - Spa Pro 20006A Manual De Usuario

• Remove all packing materials.
• Read all Important Safeguards and Operating Instructions before use.
• Wipe all surfaces with soft damp cloth or sponge. Dry completely before use.
1. Place the appliance on a flat surface.
2. Insert plug of DC supply into the plug on base of the product.
3. Remove Cover by lifting and set aside.
4. Fill the tank with tap or bottled water to the maximum level of 20 ounces.
5. Never pour water into the side openings of the Air Outlet
6. Add 1-2 drops of essential oils into water. Always fill with water before adding oil.
7. Replace Cover, check that is positioned properly.
8. Plug the AC supply into 120V AC electrical outlet.
9. Press MIST / RIGHT button once for HIGH, twice for LOW and three times for OFF.
10. Press LED / LEFT button to turn ON lighting effect. Press again to turn OFF.
11. Appliance has Auto-Off (LED lights flashing) when water level is low. To
reset, re-fill tank and follow operating instructions above.
• Before cleaning and after use, unplug AC supply and remove DC supply from Base.
• Remove excess water from tank.
• Clean appliance with a soft damp cloth and wipe dry.
• Do not immerse Base in water or any other liquid. Never place in dishwasher!
• Clean diffuser with equal parts water and vinegar using a soft cloth regularly.
Take care not to damage Air Outlet or Water Level Sensor.
• Do not use abrasive cleansers or scouring pads to clean any parts of the
appliance..

Using for the first time

Operating Instructions

Maintenance and Cleaning

3