Nexxt Solutions Smart Wi-Fi IR Manual De Instrucciones página 13

DIY configuration
Step 1
If the device is not included in the Device type list, click on
the Self-learning DIY option to start programing the
9:41 AM 60 %
remote control buttons in the Smart IR controller app.
9:41 AM 60 %
Notes:
1. The device only supports self-learning on a 38kHz carrier
frequency.
Select the type of device you wish to add.
2. Self-learning is not compatible with voice commands.
3. The self-learning function is not recommended for air
conditioning units.
4. Refer to the compatibility list provided on the app list. If
unable to program the device, then that device may not be
supported by the smart IR remote.