Thulos TH-PA1802XXL Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Disconnect the connection socket before cleaning the iron.
• When cleaning the iron, dry it well before using it again.
• Always connect the connection socket (9) inside the connection
plug (7) before connecting the device with the electric current.
• Set the temperature adjustment knob to 0 before disconnecting
the connection socket.
• Never cut food on the griddle.
• After use, allow the iron to cool in a safe place, out of the reach of
children.
Note.
Is possible that the griddle may give off a slight odor and fume the first
time you plug it. This is normal and of short duration. Plug it in and wait
for the smoke to disappear. Make sure the place is sufficiently ventilated.
OPERATION
• Unpack the appliance completely. Remove possible cork or plastic
remains.
• Before the first use, clean it according to the "cleaning and
maintenance" section.
• A lot of caution in cleaning the non-stick surface. Dry the pieces
gently.
• Insert the connection plug (9) firmly into the connection plug (7).
• Slide the grease reservoir tray (3) over its guide (4) to the grease
outlet (2).
• If you wish, you can add vegetable oil to the non-stick surface (5).
• Remove excess oil with a kitchen cloth.
• Connect the connection socket (12) to the power supply.
• Set the desired temperature with the temperature adjustment
knob (10).
• The light display (11) will light up.
• The light display (11) goes out as soon as it reaches the desired

Publicidad

Tabla de contenido
loading

Tabla de contenido