Other Problems; Overcurrent Protection - Stell SOS 3000 Instrucciones De Instalación Y Guía De Usuario

Other Problems:

1. Control Panel Problems
If the control panel has no response or can't adjust the desk, please contact your point of purchase to replace the control panel after confi rming
the desk is properly connected to power. If the new control panel works, please contact us to replace the original control panel. If the desk still
doesn't work, please contact your point of purchase for service or repair to your unit.
2. Lifting Columns Can't Operate
If the desk doesn't work, after confi rming the control panel works properly, please turn the power off, and restart the system. If it still doesn't
work, please contact your point of purchase for service or repair to your unit.

3. Overcurrent Protection

In addition, an over-current protection mode has been also programmed in this system. When the electricity is over rated specifi cation, the
system will enter this mode. The desk will lower approximately 30 mm and stop with the height displayed if the mode activates. This is only an
introduction of the function of the downward movement. No trouble shooting is required when this happens.