Axis Communications AXIS T91A61 Wall Mount Manual Del Usuario página 7

AXIS T91A Installation Guide
Install the AXIS T91A67 Pole Mount
1. Refer to Hardware overview, on page 4 for information on the sup-
plied parts.
1. Route the network cable through the bracket, securing it with the
cable holder (see fig. 4).
2. Use the supplied steel straps to attach the bracket to the pole and
tighten with a steel strap tool (not supplied).
Cable
holder
fig. 4
Cable
holder
3. Refer to the Installation Guide supplied with the network camera for instructions on how to
attach the camera to the bracket.
Steel straps
Cable
fig. 5
Pole mount
Page 7