Rockwell Automation ATA PCMCIA Guia Del Usuario página 2

2 ATA Flash Cards for PanelView Terminals (2711-NM2xx)
ATA Flash Cards
for PanelView Terminals
(2711-NM2xx)
The PCMCIA Flash ATA Cards are a storage medium for PanelView
applications. The catalog numbers for the memory cards are in the format
2711-NM2xx where xx is the capacity of the card in megabytes.
Note: At the time of this printing, the available cards are 2711-NM24,
-NM28, and -NM216). Contact Rockwell Automation sales for the
availability of additional cards.
These cards slide into the card slot of a PanelView terminal, an external
card drive or a card drive on a personal computer. These instructions show
how to insert the card in a PanelView terminal.
ATTENTION: Do not subject the memory card to moisture,
extreme temperatures, direct sunlight, flexing or extreme
!
pressure. Failure to observe this caution could result in damage
to the card.
To install the memory card in a PanelView terminal:
1. Locate the card slot on the back of the terminal. The PanelView 900
terminal is shown below.
2. Insert the card in the card slot (with key slot on top, right side) and push
until the card is firmly seated.
ATTENTION: Do not force the card into the slot. Forcing the
card into the slot may damage the connector pins.
!
PCMCIA Card Slot
Key Slot
Connector Sockets