SUPERTOOTH VOICE Manual Del Usuario página 10

"Active devices" in the Bluetooth menu of that phone.
2. Connecting to the wanted phone by using the "Paired
devices" in the Bluetooth menu of that wanted phone.
Note: Reconnection to a paired phone can also be done
by pressing the MFB (1). However, the SUPERTOOTH
VOICE will attempt to connect to the last used phone
only. Therefore, it is recommended to connect to another
paired phone using the phone menu.
Erasing all Paired Devices and Phonebook:
1. From OFF, press and hold the Volume Up (8) Button.
2. While holding the Volume Up (8) Button, press MFB
(1) for 1 second until a distinctive melody is heard on
the kit, and the version is announced. Then switch off
for 10 seconds.
All the paired devices and phonebook are now erased.
K. Special Feature
Voice Answer Mode:
Important Notice: This feature may not perform well
inside a car with high background noise.
10
• When activated, the user can accept a call by loudly
and clearly saying "ACCEPT CALL", "ACCEPT",
"ANSWER" or "OK"; say it only once and within 3
seconds emphasizing each syllables.
• When deactivated, apply normal answer of call.
Activation: Press and hold Volume Up (8) Button for
5 seconds until a voice announces, "Voice answer
enabled." At this point, when a call is received, a
beep will be heard after the name or phone number of
the caller is announced.
Deactivation: Press and hold Volume Down (7) Button
for 5 seconds until a voice announces, "Voice answer
disabled." When a call is received, only the name or
phone number of the caller will be heard on the kit.
Automatic Reconnection:
 Automatic reconnection occurs when the user (without
turning OFF the kit) goes out of Bluetooth range for
more than 20 seconds and then goes back in range.
In this case, a new reconnection system is able to
reconnect the kit to the phone anytime the user goes
back in range.