Product Installation - LG Innotek LGD521 Manual Del Usuario

4

Product Installation

▶ Front Camera Installation
1. Insert the MicroSD card in the card
slot. (Check the MicroSD card direction)
4. Attach the product in place on the top
of front windshield or middle, left or
right of the mirror.
▶ Rear Camera Installation
1. Shutdown a car battery and power
Please power off the car and ignition before
installation.
(Disconnect the power connection)
4. Connect the Rear Camera Cable
Connect the ( ㅡ ) shape's rear camera cable
to a rear camera connection and the
shape's one to the body.
※ Note ※
Please note that the product will not record
if the cable is connected incorrectly.
2. Remove the protective tape from the
bracket.
5. Connect the CLA to the 12v power
socket.
2. Attach the Rear Camera
Remove the protective tape and attach
the rear camera in proper location in
windshield.
5. Check an Operation
Turn the body on and check a proper
operation by playing the recording files on
the MicroSD card or TV-OUT.
(The video splitter cable has to be connected
when checking TV-OUT.)
( ㄱ )
Non LCD FHD-HD DASHCAM
3. Connect the cigarette lighter cable
to power connection.
6. Arrange the power cable.
3. Adjust the Rear Camera Angle
Adjust the angle with the rear camera
attached.
6. Arrange the Front/Rear Camera Cable
After checking recording operation, well-
arrange the cable.
If you embed cable to car wall, please check
cable connection. Also after embedded
double-check if the product can record
properly.
LGD521
5