Publicidad
CLSR-ST: VER 1.0
Section 3.0 – Operation
The CLSR-ST Conveyor had been designed to feed the comforter at a speed relative to
the sewing speed of the machine. When the operator presses the foot pedal the sewing
machine begins to sew and the conveyor responds with a variable speed. Pressing the
foot pedal further increases the speed of sewing and feed rate of the conveyor. Releasing
the foot pedal causes the sewing machine and conveyor to come to a stop.
If the speed relationship between the conveyor and sewing machine must be adjusted,
parameter 24 of the variable frequency drive should be modified. A larger value for
parameter 24 will increase the conveyor speed to sewing speed. A smaller value will
reduce the speed of the conveyor. See the appendix for further information on parameter
modification.
Publicidad
