Triton Blue TB-SPARKLE-1-5 Manual De Usuario página 10

Máquina efecto chispas frias
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Material clean (important note)
1. Please empty the powder by turning over the machine and clean remnants (DMX control
address: 221-239) after use.
2. If the remnants are stuck, you have to open the housing and
manually rotate the chain anticlockwise.
3. We don't offer free warranty once the machine stops working
without clean process after use.
Dust clean (important note)
1. Take down the dust-proof net to clean the dust.
2. Unplug the two plugs below machine and shake It.
Warning:
1. Do not run over 30 seconds for each time.
2. Make sure the device is turned off while refilling.
3. In case of fire, use sand to extinguish. Do not use water.
4. Keep away from children.
5. Damage caused by improper using, installation, transportation,
and maintenance, or damage caused by human factors are out of
our warranty service range.
.
10.
 
 
User manual | Triton Blue TB-SPARKLE-1-5 | September 2019 | www.triton-blue.com
 

Publicidad

Tabla de contenido
loading

Tabla de contenido