ReliOn CONFIRM Manual De Instrucciones De Usuario página 58

Step 1: Insert a test strip as shown in the diagram. Test strip should seat
firmly into meter. The meter will turn on automatically. The full screen will
come on for a moment. Make sure all symbols appear on the screen (see
page 12). The last result will then appear. Then the code number (F-2, F-3, or
F-4) will appear for three seconds followed by the Apply Blood symbol.
Make sure the code number on the screen
matches the code number on the test strip
bottle. If screen code does not match the test
strip code, use a new test strip. If code still
does not match, use a new bottle of test strips
or call Customer Service at 855.776.0662, 7
a.m. to 7 p.m. central time, 7 days a week.
58