Changing Programs - Simu EASY Guia De Inicio Rapido

4
Setting: date, current time, summer / winter time, work / rest days
4. 4. 4.
1 2 3
7 s.
4.1. Press the validation key (●) for over 7 seconds. SET and YEAR appear
on the screen.
4.2 / 4.3 / 4.4. Setting current time: 4.2: Year, 4.3: Month, 4.4: Day.
4.5 / 4.6. Adjusting current time: 4.5: Time, 4.6: Minutes.
4.7. Enter the geographic area to set the automatic winter / summer time
change: EU = Europe, US = USA, OFF = other countries (in this case,
the time will not change automatically from summer time to winter time.
Follow the procedure from 4.1 to 4.6 if you need to change the time).
5

Changing programs

Changes made in this chapter will be applied to all days of the week in the daily program and all circled days in work / rest
days mode.
5.1. Memory function: Quick save an order with a long press
1
: display only if work / rest days set
5.2. Changing the time of an up or down order
1 2
3 s.
: display only if work / rest days set
6
Resetting programs
1 2
PROG 8 s.
7 s.
7
Changing the batteries
120 s.
MAX.
SIMU hereby declares that the radio equipment covered by these instructions is in compliance with the requirements of Radio Directive
2014/53/EU and the other essential requirements of the applicable European Directives. The full text of the EU declaration of conformity is
available at www.simu.com.
4.
4
2
8 s.
3 4
1 s.
6.1. Press the validation key (●) for 7 seconds, SET and YEAR appear on the screen and the
6.2. Press the PROG button for 8 seconds.
The transmitter will then be in manual mode and be pre-programmed this way:
- Winter / summer time change: European time zone
- Daily program: Up at 7.30 am / down at 20.00 pm.
- The current date and time will remain unchanged.
2 X
Read the chapter entitled Safety instructions.
LR03 AAA 1.5V
Risk of explosion if the battery is replaced by an incorrect type.
Replace the batteries when the low battery indicator (d) goes on.
Please separate storage cells and batteries from other types of waste and recycle them via your local
collection facility.
We care about our environment. Do not dispose of your appliance with the usual household waste. Take to
an accredited collection point for recycling.
4. 4.
5 6
4.8. Setting work / rest days:
- To save one one daily program, to be repeated every day of the week,
select (circle) all the days of the week. (default setting)
- To save two different programs, (work / rest days); select (circle) only the
work days, the others will be rest days by default.
You can save and exit setting mode by pressing the validation key for 3
seconds (●).
1. Using the selection keys (◄,►) you can select the order of commands to
be saved (
2. Press the key for the command to be saved (▲ or ▼) for 8 seconds. The
shutters will carry out the command and it is saved.
- After 5 seconds, the current time will replace the previous
8 s.
program time by flashing. Press for 3 more seconds.
- If the key is released before 8 seconds, changes will not be
saved.
5
1 s. 1 s.
year flashes.
4. 4.
7 8
Can be accessed from Automatic mode
1 ou 2) - Not necessary for daily program.
1. Using the selection keys (◄,►) select the command
( 1 or 2) to be changed.
2. Press the validation key (●) for 3 seconds. SET and
EDIT appear on the screen, EDIT flashes.
3. Press the validation key (●) for 1 second.
4. Set the time for the program to be carried out and
press for 1 second on the validation key (●)
5. Set the minutes for the program to be carried out and
press the validation button (●)
2/2