Technical data
3
Technical data
Video
Signal format
Video input
Monitor outputs
Video resolution
Playback/record speed
(images per second)
Inputs / Outputs
Alarm input
Alarm output
Alarm reset input
Internal buzzer
Network connectivity
Connections
Video input
Video loop
Monitor output
Alarm input/output
Ethernet port
RS-232C serial port
RS-485 serial port
USB port
Storage
Primary storage
Secondary storage (optional)*
Environmental
Operating temperature
Operating humidity
Power supply
Power
Power consumption
8
Siemens Building Technologies
Fire Safety & Security Products
All manuals and user guides at all-guides.com
PAL or NTSC (auto-detect)
Composite: 8 or 16 looping inputs, 1 Vpp auto-terminating, 75 Ohms
Composite: 1 BNC, 1 Vp-p, 75 Ohms
SPOT: 1 BNC, 1 Vp-p, 75 Ohms
VGA: 1
Composite: 720 x 576 (PAL), NTSC: 720 x 480 (NTSC)
VGA: 800x600 @ 60Hz
100 ips (PAL), 120 ips (NTSC)
8 or 16 TTL, programmable as NC or NO
2 relay outputs, terminal blocks, programmable as NC or NO,
0.5 A @ 125 VAC, 1 A @ 30 VDC
1x TTL, terminal block
80 dB @ 10 cm
10/100 Mbps Ethernet (RJ-45)
Composite: 8 or 16 BNC
Composite: 8 or 16 BNC (auto-terminating)
Composite: 1x BNC
VGA: 1 VGA
SPOT (composite): 1 BNC
Terminal blocks
RJ-45
DB9 (P)
2-connector terminal block
2 (USB 2.0)
SATA hard disk drive (up to 3)
Built-in DVD RW drive
USB hard-disk drive, USB CD-RW drive or USB flash drive
5 – 40 °C (41 – 104 °F)
0 – 90 %
100 - 240 V AC, 2 A, 60/50 Hz
80 W max. (100 W when 3 hard-disk drives are installed)
EN
12.2008