2.
How to configure the mobile phone so that it detects
the Maestro:
•
Follow the mobile phone's user manual. Usually this involves
finding the setup, connection or the Bluetooth menu on the
mobile phone and choosing DISCOVER or ADD a Bluetooth
device. See an example of a typical mobile phone below.
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Push to talk
Infrared
Bluetooth
Modem
Synchronization
Data cable
Select
3.
The mobile phone finds Maestro!
•
The mobile phone asks if you wish to connect to it. Accept by
pressing Yes or OK on the mobile phone and confirm with the
pin code, which is 0000 (4 zeros).
•
The mobile phone will confirm if the pairing has been
successful.
•
If the pairing is unsuccessful, repeat this procedure.
If you wish to pair the the Maestro with a Bluetooth product without a
display, the product must be set to pairing mode and use password 0000
so that the pairing can be performed.
The Maestro can be paired to a maximum of 8 devices. If you try
to pair a ninth device, the device that is the longest un-used will be
removed from the Maestro. Use the list on page A to keep an overview of
what is paired with the Maestro.
How to...
...
adjust the volume
•
The volume can be gradually increased (press once for each
volume level) or by pressing the volume button
direction until the desired volume level has been reached.
•
You will hear a signal when the volume has reached the lowest or
highest level.
•
The Maestro remembers its last volume position, so that when
switched off and on it will start at the same volume position.
User manual Maestro (NO_EN_F_D_NL_ES_SE_DK_SU) 1t
All manuals and user guides at all-guides.com
Fig. 6
Connectivity
Devices found
Maestro
Back
Select
Fig. 6
0000
0000
0000
0000
0000
0000
Maestro
Fig. 6
Passcode:
****
Cancel
Ok
Cancel
Fig. 6
0000
Devices found
Maestro
Maestro
Paired.
The handsfree
is now ready
for use
Ok
in the desired
10
NO
EN
EN
F
D
NL
ES
SE
DK
SU
8