Connecting To Powered Multi-Media/Computer Speakers - Eos Wireless converge Manual Del Utilizador

Converge Wireless Receiver

Connecting to Powered Multi-Media/Computer Speakers

Using the provided "Y" cable, connect RCA cables to the rear of the Converge Wireless Receiver
unit marked AUDIO out.
1. Plug the cable from the powered speakers into the jack on the end of the "Y" cable.
2. Switch the Receiver's power switch ON
3. Turn the powered speakers ON and audio from the Converge Transmitter will begin
playing.
4. Adjust the sound level from the powered speakers volume control.
COMPUTER SPEAKERS
All manuals and user guides at all-guides.com
14
RECEIVER