XD XCLUSIVE P301.13 Serie Manual Del Usuario página 4

HOW TO USE
1. Plug in the Type-C cable.
2. Open the Case and place your device inside of the case.
3. Make sure the case is closed
4. There are two sanitizing modes - fast mode and deep mode. Fast mode will
take 90s and deep mode will take 5mins (300s).
- Fast sanitizing mode: Press the power button one time , the blue light on top
cover will light up, the UVC LED inside the box will light up for 90 seconds. The
blue light will flash 3times when sanitizing finished and light will turn off.
- Deep sanitizing mode: Press the power button two times , the green light on
top cover will light up, the UVC LED inside the box will light up for 5minutes. The
green light will flash 3times when sanitizing finished and light will turn off.
5. Flip your device and repeat above steps to sanitize both sides.
LED indicator
Blue light - Fast sanitizing mode
Green light - Deep Sanitizing mode
Fast Sanitizing
Solid Blue - In the progress of Sanitize.
Flashing Blue (3 seconds) - Sanitize Finished.
Turn Off - Sanitize Turn off
Deep Sanitizing
Solid Green - In the progress of Sanitize.
Flashing Green (3 seconds) - Sanitize Finished.
Turn Off - Sanitize Turn off
Safety sensor & Protection
Built-in magnet sensor to protect user from UVC light.
The product CANNOT be powered on when the cover is not closed.
When you open the case in the progress of sanitizing , Sanitizing will be stopped
immediately. You need to close the lid then manually press the button to restart
the sanitizing from beginning.