Technical Data; Appliance Description - Kompernaß KH 4477 Instrucciones De Uso

GUILLOTINE CUTTER
DIN A4 KH4477
Safety instructions
• This guillotine cutter is not a toy. Incorrect opera-
tion of the appliance could lead to serious physi-
cal injuries, especially of cut wounds.
• After use, do not leave the cutting edge exposed!
• Do NOT cut without using the safety guide and
NEVER cut from the righthand side of the appliance!
• DO NOT touch the cutting edge!
• Children may only use or be in close vicinity to
the guillotine cutter when under supervision!
• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• Always place the guillotine cutter on a firm sur-
face when using it.
• Should the inertness of the guillotine cutter beco-
me such that the cutting blade falls back to its
start position by itself, tighten the adjusting screw
at the pivot point of the guillotine (Offset screwdri-
ver for hexagon socket screw SW 6).
• Do not cut more than the stipulated paper volume/
cutting height. Unsuitable material and exceeding
the cutting height could lead to dislocation of the
cutting head as well as damage to the cutting
blade.
• No liability will be accepted for personal injuries
resulting from improper usage.
Intended use
This guillotine cutter is intended for the cutting of paper
and transparencies. High durability and clean cuts
are to be achieved exclusively through proper
handling of the appliance and the use of suitable
materials.

Technical data

Cutting height:
Trimming length:
Dimensions :
Weight :

Appliance description

q
Cutting blade with handle
w
Safety guide
e
Size scalings
r
Adjusting screw
Items supplied
Guillotine cutter
Operating instructions
Operation
1. Lift the cutting blade
2. Position the item to be cut under the safety guide
Make use of the size scalings
exactly.
3. Secure the item to be cut by pressing firmly
down on the safety guide
4. Draw and press the cutting blade
Disposal
Dispose of all packaging materials in an
environmentally friendly manner.
- 6 -
max. 0,8 mm =
8 Sheets (80g/m 2 )
max. 32 cm / 12 inch
ca. 52 x 17,5 x 6 cm
1,1 kg
q
up.
e
to align the item
w
.
q
down.
w
.