Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
CONNECTING THE SOAP INJECTION HOSE TO THE PUMP
AND SOAP TANK
To wash with detergent, you must first connect the soap injection hose to
the pump and soap tank.
n Tilt the machine back and allow it to rest on the handle.
n From the bottom, guide the soap injection hose through the hole in the
engine plate and securely place the end over the barbed fitting on the
pump.
n Place the other end of the soap injection hose over the barbed fitting
on the soap tank.
n Return the machine to its upright position.
A - Barbed fitting on the pump
B - Barbed fitting on the soap tank
C - Engine plate
991000911
4-11-16 (REV:01)
C
OWT INDUSTRIES, INC.
P.O. Box 35, Highway 8
Pickens, SC 29671 USA
1-800-726-5760 / www.blackmaxtools.com
R
ADDENDUM
BM80320X
A
B
Publicidad
Resumen de contenidos para Black Max ADDENDUM BM80320X
- Página 1 ADDENDUM BM80320X CONNECTING THE SOAP INJECTION HOSE TO THE PUMP AND SOAP TANK To wash with detergent, you must first connect the soap injection hose to the pump and soap tank. n Tilt the machine back and allow it to rest on the handle. n From the bottom, guide the soap injection hose through the hole in the engine plate and securely place the end over the barbed fitting on the pump.
- Página 2 APÉNDICE BM80320X CONEXIÓN DE LA MANGUERA DE INYECCIÓN DE JABÓN A LA BOMBA Y AL TANQUE DE JABÓN Para lavar con detergente, primero debe conectar la manguera de inyección de jabón a la bomba y al tanque de jabón. n Incline la máquina hacia atrás y apóyela en su mango. n Desde la parte inferior, guíe la manguera de inyección de jabón a través del orificio en la placa del motor y fije firmemente el extremo en el conector dentado de la bomba.