Remote Control - B-Speech Twiddle Modo De Uso

Twiddle.qxp 07.12.2007 10:34 Seite 21
GB
Note: You can remotely control the AV capable Bluetooth Handset , please refer to the AV menu and chose
the forward, Backward, Pause and Play. Press the required button to select the function.
AV Function by using a B-Speech A2DP Transmitter
Switch on the B-Speech®Twiddle, the pairing-mode starts automatically, switch on the Transmitter for
example B-Speech® TX, the two device will automatically be paired. It is not necessarily to be given a
pairing-code. The 3.5 mm jack of the Transmitters will plugged in audio out of the musicsource and the
sound will transfer wirelessly to the B-Speech® Twiddle.
Note: The Remote control will not be activated by using a Transmitter.
AV Function by using Line IN
Switch on the B-Speech®Twiddle, as soon as you connect the 3,5 mm stereo connector the Line In function
will be activated and bluetooth function disconnect, you can connect the wire with your audio device via
wire.
AV Function by using Line OUT
The B-Speech®Twiddle features a audio line-out connection. On this line-out connection you can connect
the included 3,5mm stereo extension cable to every audio playback source to the Twiddle.
The via bluetooth transmitted audio data will be played by the connected audio device.

Remote control

The music control is possible only in connecter with mobile phone or PC. By the pressing the forward or
reverse button, you can switch the next or the previous music title. Stop and Play key allow to stop,
or to plays of the music title.
21