San Jamar WIREWORKS C8500 Serie Guia De Inicio Rapido

SAN JAMAR
C8503wF
Figure 1 • Figura 1
diSpeNSeR Set up
iNStRuCtioNS
1. Place dispenser in desired location on
counter-top.
Figure 2 • Figura 2
2. Align suction cup feet (4) with 4 legs.
Firmly press down to secure.
Figure 3 • Figura 3
diSpeNSeR AdJuStMeNt
iNStRuCtioNS
Load cups from the back or front of dispenser.
Adjust dispenser for cup size by:
Dispensing Spring
1A. Turn both adjustment coils clockwise to
Ressort de distribution
Resorte de dispensación
1B. Turn both adjustment coils counter-clock-
2.
Adjustment Coils
Bobines de réglage
Bobinas de ajuste
San Jamar • Chef Revival
555 Koopman Lane
Elkhorn, Wisconsin 53121
USA
T: +1.262.723.6133
F: +1.262.723.4204
info@sjcr.com
www.sanjamar.com
www.chefrevival.com
www.sjcr.com
All manuals and user guides at all-guides.com
C8504wFd
Shown with spindles and straw
holder, sold separately
• illustré avec broches et porte-pailles,
vendus séparément
• se muestra con ejes y soporte para
popotes; se venden por separado
Suction Cup Feet
• patins à ventouses
• patas con ventosas
tighten for smaller cups.
oR
wise to loosen for larger cups.
When unit dispenses one cup at a time,
the dispenser is properly adjusted and
ready for use.
SJCR Canada SJCR Europe
3300 Bloor Street West Schoorstraat 26a, bus 1
CenterTower, 11th Floor 2220 Heist op-den Berg
Suite 3140 BELGIUM
Toronto, ON M8X 2X3 T: +32 1522 8140
CANADA F: +32 1522 8148
T: +1 (262) 723.6133 emea@sjcr.com
F: +1 (262) 723.4204
Customer Care: (800) 248.9826
canada@sjcr.com
wiRewoRkS
®
C8500 SERIES
CouNteRtop Cup ANd Lid
diSpeNSeR iNStRuCtioNS
The 8500 Series cup and lid dispenser is designed for countertop
organization and easily adjusts for dispensing of paper, plastic or
foam cups from 8oz to 44oz with rim diameters ranging
between 3-1/8" (79mm) and 4-1/2" (114mm).*
Lid organizer (C8500L) easily attaches to accommodate
matching lid diameters, including dome lids. Optional straw
organizer (C8500S) attaches to keep cups, lids and straws
organized in one place. See "Replacement Parts & Accessories"
for additional options.
*All tiers adjust to dispense cups with rim diameter up to 4" .
Bottom tier dispenses all cups up to 4 1/2" rim diameter.
C8504wF
C8504wFd
C8503wF
C8503wFd
See "Replacement part & Accessories" for further add-ons.
Figure 4 • Figura 4
Tray clip "snaps" down onto top tier wire.
• Le clip du récipient « s'enclenche » sur
le fi l du niveau supérieur.
• La abrazadera de la canasta "encaja" en
el alambre el nivel superior
AttAChiNg Lid oRgANizeR ANd
ACCeSSoRy iNStRuCtioNS:
Lid organizer: Snap front hood of lid tray over front wire. Lid tray can
only be assembled to top tier. (Figure 4)
Spindle (optional): Individual spindles are available to convert your lid
organizer to dispense dome lids. Using Philips screw driver, assemble
spindles using screws from bottom of lid tray. (Figure 5)
Straw holder (optional): Attach straw holder by sliding over top tier of
wireform. (see assembled photo at beginning of instructions)
RepLACeMeNt pARtS & ACCeSSoRieS:
C8500L Lid organizer without spindles
C8500S Straw organizer kit
X101924 One spindle for dome lids used in tray
X101926 Suction cup feet (2)
X102102 Dispensing spring (1)
SJCR México
Av. Universidad #1377-701
Colonia Axotla CP 01030
Del. Alvaro Obregon
MEXICO, D.F.
T: +52 (55) 3626 0772
F: +52 (55) 5273 4495
mexico@sjcr.com
™
3 cup dispensers, 1 lid organizer
3 cup dispensers, 1 lid organizer, 2 side panels
2 cup dispensers, 1 lid organizer
2 cup dispensers, 1 lid organizer, 2 side panels
Figure 5 • Figura 5
clip
tray
abrazadera
bac
canasta
wire
fil
alambre
101944