Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Kit Contents: K1
K1
New
Ref.
Description
K1
- -
Burner Sleeve
NI
A / A1
Drip Cup / Screw
NI
B / B1
Burner Box Cover / Screw
NI
C
Flare Nut
NI
D
Orifice Assembly
NI
E
Burner Assembly
NI
F
Split in Ring End
NI
G
Burner Mounting Screw
NI
Not included - Reference only
Purpose:
Install this kit to reduce excess air that causes burner fl ame "pop-
ping."
Tools Needed:
■ 1/4 Inch Nut Driver
■ 5/8 and 11/16 Inch Open End Wrenches, or two (2) 8 Inch
Adjustable Wrenches
■ Leak Test Solution
■ Refrigerator Service Manual
This procedure is to be performed by
WARNING
!
authorized service personnel only.
ATTENTION
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
Install Part
1. Unscrew
A1
(1x); remove
2. Unscrew
(1x); remove
B1
Always use two wrenches to adjust gas
AVERTISSEMENT
WARNING
ADVERTENCIA
!
!
!
!
DANGER
connections. Damaged connections,
ATTENTION
ATTENTION
ATTENTION
ATTENTION
piping, and components create the
potential for gas leaks.
P.O. Box 1285
Ann Arbor, MI 48106
www.norcold.com
A
C
D
E
A
. Set aside.
. Set aside.
B
Questions 1-800-543-1219
Burner Sleeve
1200, 1210, 2118
B
G
Fig. 1
3. Remove
from
C
4. Remove
D
from
5. Forcefully push
6. Align
F
of
K1
7. Reconnect
D
8. Reconnect
C
9. Reattach
and
A
Test for Gas Leaks
WARNING
!
ATTENTION
1.
Test propane gas connection for leaks.
2.
Restart the refrigerator on propane gas.
3.
Run a 30 minute burn test to make sure the combustion prob-
lem is corrected.
Service Kit
E
K1
F
.
D
E
. Set aside.
(ring end fi rst) fully onto
K1
with
G
. Side holes of
E
should be visible.
to
.
E
to
D
.
(1x) using
and
B
A1
B1
Do not wet or spray leak test solution
on or near electrical connections or
electrical components. All leak test
solutions conduct electricity and may
create an electrical shock hazard, shorts,
and / or damage circuits.
Do not use any leak test solution that
contains ammonia or chlorine. Ammonia
and chlorine corrode brass and copper
components.
Part No. 640453A (11.18.2019)
640452
D
.
E
.

Publicidad

loading

Resumen de contenidos para Norcold 1200

  • Página 1 P.O. Box 1285 640452 Service Kit Ann Arbor, MI 48106 www.norcold.com Burner Sleeve 1200, 1210, 2118 Kit Contents: K1 Fig. 1 3. Remove from Ref. Description Burner Sleeve 4. Remove from . Set aside. A / A1 Drip Cup / Screw 5.
  • Página 2 P.O. Box 1285 Ensemble de réparation 640452 Juego de servicio Ann Arbor, MI 48106 www.norcold.com Bague de brûleur 1200, 1210, 2118 Manguito para quemador 1200, 1210, 2118 Contenu de l’ensemble : K1 Contenido del juego K1 Nouvelle pièce Réf. Description Pieza nueva Ref.
  • Página 3 P.O. Box 1285 Ensemble de réparation 640452 Juego de servicio Ann Arbor, MI 48106 www.norcold.com Vérifi cation de l’absence de fuites de gaz Comprobar que no haya fugas de gas Ne pulvérisez pas de solution de No moje las conexiones o los...

Este manual también es adecuado para:

12102118