Quick Install Guide for p2p Bluestork Cameras (iMAC)
Installation on an iMAC :
Note : The screenshots that appear all along this guide are in english and in
french. For the latters, the French terms were kept with their translation in
brackets.
Introduction
The Bluestork Cloud cameras have an advanced software to view images from a
Smartphone, a tablet, a PC or a MAC. Once the camera is installed on your network,
you just have to flash the QRcode located under the camera, with a Smartphone,
and the images will appear!
The first step consists of installing the camera on your network. The software will do
everything. You do not have to know the networks or telecoms in order to install your
camera. Proceed as indicated below:
Contents of the pack (can vary depending on the model):
-
A BLUESTORK Cloud surveillance camera
-
A mobile wall mount
-
Two rawlplugs and two screws
-
A WIFI antenna
-
A 220V power supply
-
A quick installation guide
-
An installation CD
-
A RJ-45 network cable
All manuals and user guides at all-guides.com
144