Power On/Off; Video Recording - Wiseup PBC100 Manual Del Usuario

All manuals and user guides at all-guides.com
- 2 × Back Covers
-1 × 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Please make sure your camera is fully charged before using.
>> Please make sure the Micro SD card has been formatted already and is securely fitted
into the camera's SD card slot, or it will not work. We recommend you use a SDHC Class
10 Micro SD card.
[Note]:
If no Micro SD card is fitted into the camera or it cannot be read, the red indicator light
will be illuminated for 3 minutes, then both red and blue indicator lights will flash twice and turn
off. The camera will shut down automatically.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The red
indicator light will come on and stay illuminated, indicating the camera has entered into
standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 4seconds. Both red and
blue indicator lights will flash twice and then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation
more than 3 minutes.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The red
indicator light will come on and stay illuminated, indicating the camera has entered into
standby mode automatically.
3.2.2. Press the Video Recording Button once to start videorecording. The red indicator
light will flash twice and then turn off.
3.2.3. Press the Video Recording Button once again to stopvideorecording. The red
indicator lightwill come on and stay illuminated, indicating the camera is back to standby
mode.
[Note]:
1). A video clip will be generated and saved every 10 minutes automatically.