KTM Power Parts 60712933000 Manual De Instrucciones página 4

4
Scope of supply

1x grip, left

1x grip, right

1x drilling template, left

1x drilling template, right

8x bushing

8x screw
Assembly
- Position the drilling templates (included) on both sides of the out-
side and align them.
- Drill assembly holes on both sides with a diameter of 4,5 mm using
a corresponding drill bit.

- Position left grip (included).

- Mount screws with bushings
and tighten.

- Position right grip (included).

- Mount screws with bushings
and tighten.

(all included) from the inside

(all included) from the inside