Honda DEH-M6156ZH El Manual Del Propietario página 11

Advice
• When you recall preset stations
with REG ON, the preset number
will not appear in the display if the
tuner receives a regional station
different from the originally
memorized one.
• ON/OFF switching of REG is
effective for all bands in common.
TA FUNCTION ...................... [7]
TA (Traffic Announcement standby)
function lets you set the system to
switch automatically to traffic
announcements as they are broadcast
when you are tuned to a TP or EON TP
station, whether you are listening to
the radio,CD or CD changer.
Advice
• TP stations are stations that
broadcast traffic information. The
"TP" 2 indicator lights up when
you tune a TP station.
• EON TP stations are stations that
carry information which cross
references TP stations. "TP"
indication 2 is on also when the
radio is tuned to an EON TP
station.
All manuals and user guides at all-guides.com
To activate the TA function
Press the [7] button.
("TA" 1 lights in the display.)
The tuner begins waiting for traffic
announcements.
To turn off the TA function
Press the [7] button again.
("TA" 1 goes out from the display.)
TA function is turned off.
Advice
• The system switches back to the
original source after traffic
announcement reception.
• The tuner only stops at TP or EON-
TP stations when you use SEEK
tuning with the TA function ON.
• The tuner only stores TP or EON-
TP stations when you use AUTO
SELECT function with the TA
function ON.
PTY (PROGRAM TYPE)
HOW TO DISPLAY RECEIVED
STATION PTY INDICATIONS
................................................ [6]
Press button [6] and PTY indications
for the currently received station are
displayed. Press button [6] again to
cancel the display.
Advice
• When no PTY code is output from
the station being received,
"NONE" appears on the display.
PTY SEARCH FUNCTION
...... [6] [10] [12]
After you select the program type you
desire, the tuner searches for a station
broadcasting the same PTY code as
the program type you selected.
To select the desired PTY code
1. Press button [6] to select the PTY
group selection mode.
2. Each time you turn dial [10]
clockwise/counterclockwise, the PTY
changes.
Selecting by PTY group
1. Press button [6] to select the PTY group
selection mode.
2. Select a PTY group with a [12] button.
To activate PTY Search
1.Press button [6] to select the PTY
group selection mode.
PTY setting mode is activated with
indication of the PTY code currently
selected.
2.During PTY setting mode (continues
for 5 seconds approximately), Press
the 4 or ¢ side of button [14] to
search a station that is putting
desired PTY on the air.
[14]
11