Setting Menu; Lecture Usb - Muse M-1380 DBT Manual De Instrucciones

2. Enable NFC and Bluetooth on your Bluetooth device (see the user manual of your device for details, tap the NFC device on the NFC tag
on unit until you hear an indication voice). The display will show "Connected". NFC device is connected to this unit via Bluetooth.
3. Select and play audio files or music on your NFC device.
4. To break the connection, tap the NFC device with the NFC tag
Note: The operational range between the main unit and a NFC device is approximately 10 meters.
STEREO PAIRING
This function makes it possible for you to get stereo surround sound quality. It
requires two Bluetooth speakers M-1380 DBT to realize the real Bluetooth radio
channel wireless separation, therefore, you've got to purchase two M-1380 DBT.
Tips: it is suggested that the distance between the main speaker and secondary
speaker is within 4 meters.
1. Turn on two Bluetooth speakers M-1380 DBT.
2. When both speakers are in pairing mode, press button on one Bluetooth speaker
which will become the main speaker (left channel) until you hear the indication
voice "Searching", then it will search and connect to the secondary speaker (right
channel). They will recognize the left and right channel automatically. You will
hear the indication voice "Stereo Pairing" when the two speakers are connected
successfully.
3. Connect your main speaker to Bluetooth enabled device (e.g. smart phone).
4. Play your song and listen to the sound in stereo.
5. Press button on either speaker to pause playback. Press again to resume playback.
6. Press and hold button on the main speaker to disconnect the stereo pairing.
Hereby, NEW ONE S.A.S, declares that this MUSE M-1380 DBT is in compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse-europe.com
LISTENING TO DISC
1. When the unit is ON, repeatedly press SOURCE button to select Disc icon
disc tray. Insert a disc with label side facing up. Press
"NO DISC").
2. After a few seconds, the total number of tracks will appear on display for a few seconds and playback starts automatically.

LECTURE USB

1. Connect an USB device to the USB MP3 port on unit.
2. Repeatedly press SOURCE button to select USB icon
few seconds.
3. Select desired track with / .
Notes:
- The total number of MP3 files on the USB device should not exceed 999.
- The device may not contain more than 99 directories.
- The reading time takes about a few seconds or more depending on the amount of MP3 files and folders on USB device.
- Do not put anything other than a USB device to the port of this unit. Other objects may damage the USB mechanism.
- The USB socket must not be connected to the computer directly, for that may damage the unit.
- There are many USB devices in the market. We cannot guarantee to support all different models. Please try another USB device if your device
is not supported.
PLAY MODES (CD/MP3)
Repeat playback
Press REP. button on remote control repeatedly to select a play mode, repeat indicator will lights up.
- Repeat One: display shows " ".
- Repeat folder: display shows " ". (MP3 only)
- Repeat All: display shows " ".
To cancel repeat playback, press REP. button repeatedly until repeat indicator disappears.
Random playback
Press RAND. button on remote control. Random indicator "
cancel this function. Random indicator lights off.
Program playback
1. In stop mode (press button once), press PROG. button on remote control. The display will show "
track).
2. Select the desired track with / , then press PROG. button to confirm.
3. Repeat above steps to program up to 32 tracks for CD and 99 tracks for MP3.
4. Press to start program playback.
5. Press button on remote control once to stop the program playback. Press
Select a folder (mp3 only)
• Press on remote control to select the first track of next folder of your current disc or USB.
• Press on remote control to select the first track of previous folder of your current disc or USB.
ST-3640DA IB MUSE 001 REV1.indd 8
on this unit again.
. The display will show "Reading...". Press
again to close the disc tray. (Note: If there is no disc inserted, the display will show
. The display will show "Reading...". It will start to playback automatically after
" lights up. It will play all tracks in random order. Press RAND. button again to
01" and 01/xx (xx is total number of
twice to cancel this function.
EN - 5
By number buttons 1~10
Use the number buttons to input the track number, and it will start playback from the selected track automatically.
If you want to input the track number bigger than 9, use the 1-10 button.
Example 1, to select the 10th track, firstly press 1 then press 10 (1+10=10)
Example 2, to select the 14th track, firstly press 1 then press 4 (1+4=14)
Example 3, to select the 40th track, firstly press 4 then press 10 (4+10=40)
Example 4, to select the 305th track, firstly press 3 then press 10, and press 5 (3+10+5=305)
CONNECTING AUXILIARY SOURCE
To AUDIO IN RCA jacks
1. Connect your auxiliary source (e.g. DVD player) to the AUDIO IN L/R jacks on back of unit with RCA audio cable (cable not included).
2. Press SOURCE button repeatedly to select RCA icon. The display will show "
3. Start playback from your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the AUDIO IN L/R jacks.
To 3.5mm AUX IN jack
1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack of unit (cable included).
2. Press SOURCE button repeatedly to select AUX icon. The display will show "
3. Start playback from your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the AUX IN jack.

SETTING MENU

When the unit is on, press and hold MENU button to access setting menu. Rotate SELECT knob to select an option and/ or adjust the setting,
then press SELECT to confirm.
Note:
- The " " will be displayed next to the current setting.
- When do the setting in the menu, press the MENU button to return back to previous step.
to open the
DAB setting menu
Station List
Show a full list of DAB stations available.
Full Scan
This function allows you to automatically scan and create a list of receivable DAB broadcasts.
Manual tune
This function can be used to assist the positioning of antenna or the unit, to enhance specific channel or frequency reception ability.
Rotate SELECT knob to select <Manual tune> and press SELECT to confirm. Rotate SELECT to select your desired frequency and press
SELECT to tune to the station for the selected frequency.
Station order
Multiplex: Stations are listed in numerical and then alphabetical order.
Alphanumeric: Stations are listed in alphabetical order.
Active: stations are listed according to the signal strength of stations.
DRC (Dynamic range compression)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment.
Rotate SELECT knob to select "Off ", "Low" or "High", then press SELECT to confirm.
DRC off - no compression. This is the default setting.
DRC low - medium compression.
DRC high - maximum compression.
Note: DRC is effective only in dynamic range compression broadcast.
Prune station
Remove stations that are listed but unavailable.
The display will show "This will remove all invalid stations, continue?"
Rotate SELECT to select "Yes" and press SELECT to confirm.
Main menu
* Time setup
** Set time
Set date (DD/MM/YYYY) and time. Refer to the operations in section "SETTING THE TIME AND DATE".
** Clock format
Set time format: 12/24 hour clock display.
** Auto update
No update: show the time from system setting.
From radio: time update from FM or DAB/DAB+.
* Alarms
Set the alarms. Refer to the operations in section "SETTING THE ALARM".
* EQ
Select the desired sound effect: Default, Rock, Classic, Jazz, Pop.
".
".
EN - 6
2020/1/8 17:35:31