Molpir COMPACT 1.6 Manual Del Usuario página 10

COMPACT 1.6
EN
Function F0 - Manual Operation of the equipment
F0
Allows users to select the comfort temperature and change the centrifugal blower
speed.
The comfort temperature is controlled by briefly pressing the
panel (15/ 27 ºC - 59/80º F) or
The centrifugal blower speeds can be controlled using the
of the remote control, with the display showing
Function F1 - Digital thermometer function
In this function, the Compact 1.6 will indicate on the screen the temperature inside the cabin.
Function F2 - Time Programming Function
F2
programmes the unit to disconnect automatically during a period of time between 1
and 9 hours. To programme it, keep the On/Off key
the screen, select the operating time with the
.
Off
Function F4 - Automatic Operation of the Unit
F4
When selecting
selected temperatures Between (15/ 27 ºC - 59/80º F).
With this function, the unit regulates automatically its performance parameters.
Function F6 ºF Selection
To activate this function, keep the On/off
F6
, and then release the key to directly enable ºF. To return to ºC, keep the
on the control panel pressed down with the display flashing
flashing, press the
carrying out this operation, meaning it must be registered again once finished.
CA
, the symbol will appear on the display alternating between the
key on the control panel. The control is disabled when
in remote control.
V1 V2
,
pressed until
keys and confirm by pressing On/
key pressed down until the display shows
10
keys of control
keys of the Panel or
V3 V4 V5
, , , .
F2
, appears on
C
when it stops
key