CONNECTING THE UNIT
1
Connect the temperature regulator to the base
of the basic unit.
2
Set the temperature selector switch to heat
level '0'
3
Connect the plug to a 230V, 50Hz fuse socket.
ATENTION: Do not use a multiple outlet strip or
extension cable.
Preparing food:
1
Brush the pan with a Little cooking oil.
2
Set the temperature regulator to the required heat
level. The control lamp will light up to signal that the
unit is ready for use (on)
Heating
Temperature ºC
levels
1 & 2
ca. 100ºC
3 & 4
ca. 150-200ºC
5
ca. 240ºC
Thermostat
It takes ca. 5-10 minutes after the unit is switched on before the control lamp goes
out. You can then start cooking the food.
Once cooking is complete, the unit can be kept warm. To do this, set the
temperature regulator to the thermostat level.
Using the cover:
Use the glass cover where possible when cooking all food types.
The cover prevents smells from escaping and reduces cooking time.
Note:
The glass cover has a vent through which hot steam can escape.
Avoid contact with this escaping steam.
Food type
Roasted food, meat, etc.
Pancakes, scrambled eggs,
bacon, etc.
Grilled foods, pizza, etc.
Warming function.